DIN connectors
Binder-USA has expanded its line of M16 field-attachable DIN connectors with a larger cable outlet size. The Series 423 M16 connectors are now available with a PG11 cable outlet for cable diameters from 8 to 10 mm. In addition, the Binder Series 423 line of cylindrical connectors also has a 4-6 mm and 6-8 mm option. All connectors are available with 7 to 24 gold-plated contacts. When properly mated, the mated pair is IP67-rated, applicable for areas with liquids and debris. An internal shielding ring provides excellent shielding against electromagnetic interference. The M16 connectors are fully mating-compatible with other Binder-USA M16 connectors, including front- and rear-mounted panel receptacles. Website: www.binder-usa.com

Portable anemometer
Omega Engineering new portable anemometer has digital readability and a remote probe. The LCD reads air velocity and temperature simultaneously and it can record minimum and maximum reading with recall. The CE compliant HHF42 also comes with a heavy duty carrying case. Applications include: air conveyors, flow hoods, balancing, fans/motors/blowers, furnace velocities, refrigeration cases, paint spray booths and environmental testing. 
Website: www.omega.com

Swinghandle
DIRAK introduces a new 3-310 Swinghandle FS Offset-Duo-3. The swinghandle gear actuates a slider that controls the closing mechanism. This mechanism is offset from the main body of the swinghandle. There is wide rod-latch mechanism that would require additional space inside the door. 

The new 3-310 swinghandle requires 30 mm of space between the door edge and gasket. Locking protection is through the use of a profile cylinder and can be configured for multiple latching points (2, 3 or 4 point latching). 

For applications where the sensitive electronic equipment housed inside the enclosure needs to be protected from dust and water penetration, this new swinghandle satisfies IP65 requirements. 
Website: www.dirak.com

Blind rivet
Alcoa Fastening Systems’ HuckLok™ structured blind rivet is designed to meet the requirements of HVAC equipment assembly. It has a quarter-inch grip range and large blind-side footprint. This design creates a structural rivet and is designed to fill a wide range of hole sizes and grip ranges from 1/8" to 7/8. 
Website: www.huck.com

Rocker switch
Cherry Electrical Products introduces its new KR Series miniature, water-resistant rocker switch suited for applications in which the switch will be exposed to fluids, weather or other harsh conditions. The KR Series switch features a silicone rubber actuator and snap-fit mounting, making it IP65 compliant against dust and water. The switches use heavy-duty silver alloy contacts to achieve current ratings of 20 amps at 14 VDC and 16 amps at 125 VAC. The miniature switch fits an industry-standard panel cut out of 13mm x 19.8mm. Common applications include outdoor appliances, power equipment, commercial appliances and medical equipment. 
Website: www.cherrycorp.com